Updated November 2026
Learning how to fish the ned rig means setting up a small, weedless jig head with a soft plastic bait and working it slowly along the bottom. Once you understand the basic setup and retrieve, you can catch bass, panfish and other species in shallow cover where bigger lures get snagged. This guide covers the gear, the rigging steps and the simple hop-and-pause retrieve that makes the rig productive.
What You Need Before You Start
The ned rig is one of the simplest presentations in freshwater fishing, so your kit does not need to be complicated. Gather these items first:
Shopping for one? See our guide: How Much Is a Fish Finder? 6 Best Picks Compared (2026).
- A medium-light spinning rod, roughly 6 to 7 feet long, with a sensitive tip
- A spinning reel spooled with 6 to 10 pound fluorocarbon or braid with a fluorocarbon leader
- Ned rig jig heads, usually 1/16 to 1/8 ounce, with a short wire or bait keeper
- Soft plastic baits about 2 to 3 inches long, such as a stubby, bulb-shaped minnow imitation
- Pliers, a bait holder or small scissors, and a few spare jig heads
How to Rig a Ned Rig Step by Step
The rigging is quick, and you can do it on the bank or in the boat. Follow these steps:
- Tie your fluorocarbon leader to the main line with a double uni knot or a palomar knot.
- Tie the leader to the jig head’s eye, or use a loop knot if you want more freedom of movement.
- Slide the soft plastic onto the hook so the bait sits straight, with the hook point hidden in the body.
- Check that the hook point is exposed enough to set, but not so far that the bait tears when you cast.
How to Fish a Ned Rig Effectively
The ned rig works best when you keep the bait in contact with the bottom and move it very slowly. Most anglers use a hop-and-pause retrieve:
The Basic Hop-and-Pause Retrieve
- Cast past your target and let the jig settle until it touches bottom.
- Lift your rod tip about 6 to 12 inches, then drop it back to let the bait fall.
- Pause for 3 to 10 seconds, watching your line for any twitch or slow movement.
- Reel up any slack and repeat, moving the bait slowly across the bottom.
Reading Bites
Ned rig bites are often subtle. A bite can feel like a tick, a slight weight change or a line that simply stops falling. When the line moves in any unnatural way, set the hook with a firm sweep of the rod rather than a hard yank.
Choosing Jig Weight and Structure
Match your jig weight to depth and wind. Lighter heads, around 1/16 ounce, suit shallow water and calm conditions. Heavier heads, around 1/8 ounce, help you keep contact with the bottom in deeper water or wind. Ned rigs excel around rocks, gravel flats, docks and weed edges, where you need a lure that stays in the strike zone without constant snagging. If you are new to bottom-based presentations, you may also find our guide How to Tie Fish Hooks: A Step-by-Step Guide for Beginners useful for tying reliable knots.
Common Mistakes to Avoid
- Retrieving too fast. Keep the bait moving at the speed of a crawling creature, not a swimming minnow.
- Using a jig head that is too heavy for the water depth, which leads to fast falls and missed bites.
- Leaving too much slack, which hides light bites and weakens your hookset.
- Failing to check your bait after each cast, since a torn or misaligned plastic reduces action.
- Setting the hook too hard on a light, fluorocarbon line, which can pull the hook free.
Recommended Gear
A few purpose-built items make the ned rig easier to fish, especially for beginners.
- A dedicated ned rig jig head with a short wire keeper helps hold soft plastics in place through repeated casts. View on Amazon
- Stubby, bulb-style soft plastic baits are the classic ned rig profile and are easy to rig weedless. View on Amazon
- A sensitive spinning rod in the medium-light range makes it easier to feel subtle bites. View on Amazon
FAQ
What line should I use for a ned rig?
Many anglers use 6 to 10 pound fluorocarbon because it sinks, has low visibility and offers some stretch. Braid with a fluorocarbon leader is another common choice for sensitivity.
What size soft plastic works best?
Baits around 2 to 3 inches are the usual starting point. Smaller baits can help with panfish, while larger ones can attract bigger fish.
Can beginners use a ned rig from a dock or pier?
Yes. The rig works well around pilings and structure from a dock or pier, provided you follow local fishing rules and watch for snags.
Conclusion
To fish the ned rig well, rig a light jig head with a stubby soft plastic, then use a slow hop-and-pause retrieve along the bottom. Pay attention to subtle bites and keep your line tight without yanking. With practice, this simple setup becomes one of the most reliable tools in your freshwater kit.
Related reading
- How to Tie Fish Finder Rig: A Step-by-Step Guide for Beginners
- How to Make a Fish Finder Rig: A Step-by-Step Guide for Beginners
- How to Make Flounder Fish Rigs and Bait: A Step-by-Step Guide for Beginners
- Topwater Lure Types and How to Fish Them
- Mahi Mahi Fish How to Cook: 5 Simple Steps for Beginners

Write Your Review
No reviews yet. Be the first to share your experience!